Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Bellevue
If your gate has stopped opening, is reversing on its own, or the operator is grinding, we can help. We’re a gate-only shop serving Bellevue and the surrounding Eastside, and we handle everything from a stuck manual swing gate to a fully integrated slide gate with intercom and card reader. Call (855) 683-9015. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.

Bellevue isn’t a place where gates are an afterthought. From the hillside estates above the lake to gated driveway communities off the main corridors, a gate here is often the first thing a visitor meets and the piece of hardware that has to work in the wet season and the dry one. Our technicians have up to experience, and every tool and every diagnostic we carry is configured for gates, not split across unrelated trades. That focus matters when the problem sits somewhere between bent steel and a control board. You can see the full scope of what we handle on our gate repair page.
Why Bellevue Homeowners Call Bellevue Gate Repair for Gate Repair
Bellevue’s gate repair load is shaped less by old housing than by the wave of high-end hillside estates and gated driveway communities built from the 1990s through the 2010s, especially around Clyde Hill, Medina, and the West Bellevue slopes. These aren’t simple driveway barriers. They’re heavy custom slide and swing gates with integrated intercoms, card readers, and video entry, and they have to stay online through relentless wet winters. That’s a different repair problem than a bent gate on a mid-century rambler, and it’s the one we’re built for.
We also serve a dense concentration of tech-professional property owners who expect app-controlled access and a documented service history. So a call here is as much about keeping a smart access system integrated and working as it is about fixing steel. We work on residential, multi-family, and commercial gate systems, and we diagnose both the mechanical structure and the electrical side in a single visit. When a generalist tells you the control board is dead, we can usually tell you why.
Our technicians have up to experience, and we’re fluent in the brands that dominate this market. Call (855) 683-9015 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Gate Welding in Bellevue
Gate Welding in Bellevue usually comes up when a heavy bespoke gate has taken a hit, a hinge has torn loose, or the years of damp air have started working on a joint. On welded ornamental and custom fabricated gates, the fix isn’t a patch-and-paint job. It’s matching the original material and joint, then re-square the frame so the gate swings true again instead of binding against the post. Typical gate welding in Bellevue runs $250 – $650 for a hinge or joint repair, and $400 – $900 for a structural repair on a heavy ornamental panel, depending on access and finish.
Hinge and Joint Repairs
A torn hinge on a heavy gate is a load problem, not just a broken weld. We look at how the panel hangs and whether the post is carrying the weight before we lay a bead. Weld it without fixing what pulled it loose, and it tears again within a season.
Rust and Frame Repair
Puget Sound damp air works on any bare or chipped steel. We treat rust at the source, rebuild thin sections where needed, and refinish so the repair blends with the rest of the gate. On gates near the lake slopes, that finishing step matters more than most people expect.
Commercial Gate Repair in Bellevue
Commercial Gate Repair in Bellevue covers the gates that keep a property moving: gated office parks, multi-family entries, and secured commercial driveways where a failed operator means a line of cars or a blocked access lane. We handle the access-control side as well as the steel, from card readers and loop detectors to intercom integration. Typical commercial gate repair in Bellevue runs $300 – $800 for an operator or sensor repair and $600 – $1,500 for a control or access-integration fix, with the written estimate setting the final price.
Access Control and Loop Detectors
A gate that won’t recognize a card or a vehicle is usually a sensor or reader problem, not a dead operator. We test the loop, the reader, and the control logic in one visit. That’s the part general handymen turn down and single-brand shops can’t diagnose.

Operator and Safety Device Repairs
On a busy commercial gate, entrapment protection isn’t optional. We check that the safety edges and photocells actually reverse the gate on contact, then service the operator. A commercial gate that runs but won’t stop is a liability, not a convenience.
Trusted Brands We Service in Bellevue
We work on systems from Elite, Mighty Mule, LiftMaster, and FAAC, among the nine gate and operator brands we’re trained on. Whether your operator is a LiftMaster on a gated community entry or a Mighty Mule on a single residential drive, we know the system and how it fails. We don’t stock parts on a truck, so every repair is measured and planned around your actual gate and operator, and that means the right part instead of a guess. On a brand-agnostic repair approach, we diagnose the real problem rather than defaulting to replacing an unfamiliar system. Our technicians have up to experience, and the range shows on the harder jobs.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Bellevue Homes
- Wet fir needles and moss packing the track channel. Every fall the slide gate track fills with wet needles and moss, so the panel drags, the operator strains, and the safety photocell trips the reverse cycle. Clearing and draining the track is the first fix.
- Water intrusion into keypads, intercoms, and control boxes. Months of steady rain and damp air get into entry pedestals and control housings, causing smart-access systems to go intermittent or dead. Sealing and drying the electronics is routine work here.
- Hinge post and footing failure on heavy swing gates. A heavy custom swing gate sags because the post and its footing are giving way, not just the panel. Adjust the panel alone and the sag reappears; the real fix is at the post.
- Operator strain on older single-arm gates. On the older east-side and Crossroads ramblers, simple manual or older single-arm swing gates wear at the arm and hinge points. Corroded hinges and damp control boxes are common.
Pricing for Gate Repair in Bellevue, WA
We keep pricing honest and per job. A typical gate realignment in Bellevue runs $150 – $400, lock and latch repair $120 – $350, and hinge or post repair $200 – $600. Electric and automatic gate repair, which covers operator, control board, and sensor work, typically runs $250 – $750, and a new operator installation is scheduled and quoted after a free measure. What moves the number is how heavy the gate is, whether the post or footing needs work, and how much of the access system is involved. The written estimate sets the final price, and you’ll have it before any work starts. Free estimate: call (855) 683-9015.
We Also Serve Cities Near Bellevue
We cover the surrounding Eastside as well, including Mercer Island, Redmond, Sammamish, and Kirkland. The same wet-winter gate problems and heavy custom gates show up across these communities, and we bring the same gate-only focus to each. If you’re just outside Bellevue, call and we’ll confirm coverage for your address.
Serving Bellevue, WA – Our Local Coverage Area
We serve Bellevue and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Bellevue
It’s usually a fouled track channel, not a failed operator. Wet fir needles and moss pack the channel, the panel drags, the operator strains, and the safety photocell trips the reverse cycle. A technician clears and drains the track, checks the rack and pinion for wear, and confirms entrapment protection still reverses on contact. Call (855) 683-9015 for an exact quote. Estimates are free.
The hinge post or its footing is failing under the weight of the gate, so adjusting the panel alone won’t hold. The real fix is correcting the sag at the post, not just the panel. We diagnose both the structure and the hinge points in one visit. Call (855) 683-9015 for a free estimate.
Yes. Months of steady rain and damp air get into control boxes, intercoms, and keypad pedestals, causing intermittent or dead smart-access systems. We inspect for water intrusion and seal the electronics as part of the repair. Call (855) 683-9015 for an exact quote. Estimates are free.
Usually, yes. We test the reader, the loop, and the control logic to find the actual fault instead of replacing an unfamiliar system wholesale. That’s the brand-agnostic approach that keeps your integrated entry intact. Call (855) 683-9015 for a free estimate.
Your gate should have working safety edges or photocells that reverse the gate on contact, and we test that they do. A gate that runs but won’t stop for an obstruction is a safety problem, and we check it on every automated repair. Call (855) 683-9015. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Bellevue Gate Repair.