Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Redmond
If your gate has stopped opening, is moving sluggishly, or cycles on its own, you need a specialist who can read both the mechanics and the electronics. We repair electric gates across Redmond, from the long solar-powered estate entrances off Redmond Ridge and Union Hill to the badge-and-loop perimeter gates around the tech campuses in 98052. Our technicians have up to experience, and we work on residential, multi-family, and commercial gate systems. One call to (855) 683-9015 gets a free estimate, and we answer 24/7 with fast dispatch from 7am to 7pm.

Why Redmond Homeowners Call Bellevue Gate Repair for Electric Gate Repair
Redmond is our most demanding service radius because it mixes two very different jobs in one town. Corporate perimeter gates around the Microsoft-era office parks need access-control integration and loop detection that works. Long private driveways on multi-acre lots on Redmond Ridge and Union Hill need operators sized for heavy spans with power runs that never reach the gate. A generalist with one brand of parts can’t cover both, and a garage-door company that treats gates as a side job usually guesses at the control board.
We work the whole gate lifecycle: repair, electric and automated gate repair, and new installation. That matters on a Redmond property because the mechanical structure and the electrical/automation components get diagnosed on the same visit, by technicians who work on gates all day. Property managers and HOA boards in Redmond call us because we can name what failed and why, not because we carry every brand.
Our team and tools are set up for gate work, not split across unrelated trades. When a Redmond operator is grinding, the arms are out of sync, or a photocell keeps faulting, we treat each as a diagnosable problem with a known fix. Call (855) 683-9015 for a free estimate.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Gate Opener Repair in Redmond
Gate Opener Repair in Redmond often starts with a power question before it starts with a part. On the long driveways off Redmond Ridge and Union Hill, mains power frequently never reaches the gate, so the operator runs off a solar panel and battery bank. The first decision on those properties is usually whether the panel and battery are keeping up, not whether the operator itself is broken. Typical Gate Opener Repair on a Redmond estate gate runs $280 – $650, depending on whether the fix is a battery bank and controller, a damaged rack and pinion, or a full operator motor swap. On corporate and HOA gates in 98052, our gate opener repair team handles the same operator faults plus the loop and badge interface that feeds them. Every price is quoted before any work starts.
Solar Opener and Battery Failure
A solar gate opener that gets sluggish by January is usually telling you the battery bank is past its useful life or the panel is shaded by tree growth. We test battery health under load and look at the panel angle, not just the voltage at rest. A heavy wide farm gate drains a marginal battery fast.
Rack and Pinion and Chain Faults
Douglas-fir needle litter packed into the rack and pinion will wear the teeth and leave the gate stuck partway. We clear the drive, check alignment, and replace what’s stripped. Moss creeping into the operator housing causes the same intermittent faults and gets cleared at the same time.
Automatic Gate Repair in Redmond
Automatic Gate Repair in Redmond covers the whole system: the operator, the safety edges, the photo-eye, the keypad and remote, and the control board that ties them together. On the shaded, tree-lined driveways of Redmond Ridge and Union Hill, that repair usually lands in the spring. A gate that cycled fine all summer jams once the winter rain saturates the wood and the photocell lenses fog over, and the call comes in when moss and needle litter have packed the moving parts. A qualified local pro clears and dries the operator, re-aims and tests the safety photocell, and checks battery health on any solar system. Then they look past the panel to the hinge post, because a sagging gate usually fails there rather than in the middle. On a heavy wide farm or estate span, the post footing and operator sizing get reviewed before any parts are swapped. Typical Automatic Gate Repair for a Redmond residential system is $250 – $700, and commercial swing or slide gate work with access-control integration runs higher. We quote before any work begins.
Photo-Eye, Keypad, and Sensor Faults
Persistent rain and fog on tree-shaded driveways fog the photocell lenses until the gate refuses to close. We re-aim, dry, and test the safety sensors. Keypads that short out from moisture get repaired or replaced, and remotes get re-paired to the receiver.
Sluggish Cycling and Gate Hardware
A gate that moves slowly, sticks partway, or reverses without a cause is usually fighting itself. Hinge posts and hinges that pit and seize in Redmond’s damp winters are the common culprit. We free and adjust the hardware and confirm the operator is sized for the span.

Trusted Brands We Service in Redmond
We work on the operators Redmond properties actually have: LiftMaster on a lot of the newer HOA and commercial installs, FAAC on heavy sliding gates at corporate perimeters, and Mighty Mule on more than a few DIY solar driveway setups off Redmond Ridge. When you call, you don’t have to know the brand, only that the gate is electric or automated. We diagnose across mechanical and electrical components and order what’s needed for the fix, so you’re not waiting on a part nobody stocks. Fast turnaround after the on-site estimate, and one price for the job. Call (855) 683-9015.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in Redmond Homes
- Fogged and shorted photo-eyes. Persistence rain and fog on shaded Redmond Ridge driveways leave the photocell lenses fogged and the safety sensors shorted, so the gate won’t close. It’s the most common safety fault we clear in spring.
- Swelling wooden estate panels. Wooden estate gate panels swell and sag through the wet winter, then warp in the long dry summer, and the hinge post takes the stress. A sagging panel usually fails at that post, not the middle.
- Needle and moss fouling. Douglas-fir needle litter packs into the rack and pinion and moss creeps into the operator housing on tree-lined lots. Both leave the gate sluggish or stuck partway.
- Solar battery fatigue. On multi-acre lots where mains power never reaches the gate, solar openers work until the battery bank ages out. Health at load is where the fault shows.
Pricing for Electric Gate Repair in Redmond, WA
Prices for electric gate repair in Redmond are estimated per job, and the written estimate sets the final price. A typical Gate Opener Repair in Redmond runs $280 – $650, and typical Automatic Gate Repair on a residential system runs $250 – $700. Sensor, keypad, and remote repairs sit at the lower end; control board swaps, operator motor replacements, and heavy farm or estate gate work sit at the higher end, especially when the hinge post, footing, or battery bank needs attention. Solar gate openers add a little to labor because the panel and battery bank get tested under load. What raises cost is the span and weight of the gate, whether the post footing is sound, and whether access-control integration is involved. The estimate is free, and we quote and agree the price before any work starts. Call (855) 683-9015 for an exact quote.
We Also Serve Cities Near Redmond
Redmond’s rural-estate and corporate-perimeter gates sit in a tight radius, and we cover the cities around it: Union Hill-Novelty Hill, Sammamish, Kirkland, and Bellevue. Long driveways and heavy spans near Union Hill-Novelty Hill get the same power-first approach as Redmond Ridge. Tighter lakeside lots in Kirkland and higher-density gates in Bellevue get the access-control focus. Same free estimate, same specialist work on every call.
Serving Redmond, WA – Our Local Coverage Area
We serve Redmond and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Redmond
Yes, a solar gate opener and battery bank can handle a heavy wide estate gate if the operator is sized for the span and the panel gets enough sun. On Union Hill driveways where mains power never reaches the gate, solar is often the practical first decision before any repair. The operator has to be matched to the gate weight and cycle frequency, and the battery bank needs to carry it through Redmond’s darkest weeks. We check the panel angle and battery health at load. Call (855) 683-9015 for a free estimate.
It jams every winter because Redmond’s rain saturates wooden gate panels and fogs the photocell lenses on shaded driveways, and the gate starts fighting itself. Moss and Douglas-fir needle litter pack the moving parts at the same time. The fix is to clear and dry the operator, re-aim and test the safety photocell, and check the hinge post for sag. Call (855) 683-9015 and we’ll quote the repair before any work starts.
Check that the gate has working safety edges or photo-eye sensors that reverse the gate when something is in its path, and have them tested properly. A gate that closes onto a person or vehicle without reversing is an entrapment hazard. We test the safety sensors and re-aim or replace them if they fail, and we can tell you what’s missing on an older install. Call (855) 683-9015 for a free on-site estimate.
It’s both. Moss and needle litter that slow the gate or cause intermittent faults call for a repair visit to clear the drive and check the rack and pinion and operator housing. On tree-lined properties in Redmond, the same fouling comes back, so a periodic clear-out keeps the operator from wearing out early. We quote a one-time visit per job. Call (855) 683-9015.
Usually not. A gate that sags is often failing at the hinge post rather than the panel, and fixing the panel without the post fixes it twice. We check the post footing and hinges first, and only replace the panel when it’s warped or cracked beyond repair. Call (855) 683-9015 and we’ll give you a free estimate before any work starts.
If your Redmond gate won’t open, is moving poorly, or the operator is grinding, get a gate specialist on-site rather than a generalist guessing at your control board. We handle both the mechanical gate structure and its electrical and automation components in one visit. Call (855) 683-9015 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Bellevue Gate Repair.