Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Redmond
A gate that won’t open shuts down more than a driveway. If you live in Redmond, you already know how much a stuck gate ripples through a morning – the school run, the commute, the delivery driver stuck at the curb. We repair gates across Redmond, WA, from the corporate perimeters of 98052 to the long estate driveways off Redmond Ridge. This is all we do, so when your gate stops working, you’re calling a specialist instead of a generalist guessing at your control board. Call (855) 683-9015. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Why Redmond Homeowners Call Bellevue Gate Repair for Gate Repair
Redmond isn’t one kind of gate market, and we plan for that. On the commercial side, office parks and gated communities in 98052 and 98053 run badge- and loop-integrated slide and swing gates where the failure is usually electronic – a control board, a loop detector, or intercom wiring. On the acreage side, private driveways off Redmond Ridge and Union Hill run solar openers and heavy-duty operators for wide entrances where trenching in mains power is impractical. We service both, and that range is why property managers and homeowners in Redmond keep our number.
Our technicians have up to experience, and we work on 9 major gate and operator brands. We’re a dedicated gate specialist – not a garage-door company that takes gate calls on the side. If your operator is a LiftMaster or a Mighty Mule, we know the system. Call (855) 683-9015 for a free estimate.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Metal Gate Repair in Redmond
Metal Gate Repair in Redmond starts with figuring out whether the problem lives in the structure or the electronics, and often it’s both. Redmond’s wet, maritime winters pit and seize steel posts and hinges, and saturated post footings let a steel post pull loose – especially on the older suburban installs in 98052. The work usually means soaking rusted hinges free, re-setting a loose post, welding a cracked frame, or re-hanging a sagging swing panel so it clears again. Typical metal gate repair in Redmond runs $250 to $900 for realignment, hinge, and post work, with welding or structural fixes toward the top of that band. The written estimate sets the final price, and we quote before any work starts.
Rust and Post Work
Steel posts on Redmond properties take months of rain, and rust at the base is where gates start to wobble. We check the footing and hinge post first, because a sag that looks like a panel problem is often the post. Fixing the post before the panel saves you from re-doing the same repair next season.
Realignment and Hinge Repair
A gate that drags or won’t latch is usually out of alignment at the hinge. We check the hinge post for movement, then adjust so the panel swings true instead of forcing the latch. Done at the post, a realignment holds far longer than forcing the hardware back into place.
Wood Gate Repair in Redmond
Wood Gate Repair in Redmond has a seasonal rhythm that’s hard to miss. The long dry summers swell and warp wood panels, then months of persistent rain leave them saturated and sagging at the hinge post. On the shaded, Douglas-fir-lined driveways of Redmond Ridge and Union Hill, that cycle hits wooden acreage gates hardest. The job is usually structural – straightening a racked frame, replacing a rotted hinge stile, tightening or re-seating the hinge post, and re-hanging the panel so it clears the ground. Typical wood gate repair in Redmond runs $300 to $1,100 depending on panel size and how much of the frame needs replacement. We give a written estimate first and quote before any work begins. A wood gate beyond repair is often worth replacing with a steel or aluminum panel that handles the wet cycle better.
Swelling and Sag Correction
When a wooden panel swells and sags, the fix belongs at the post, not the panel. We check the hinge post for movement in saturated ground, then correct the sag there. That’s what restores clearance and travel without you replacing a sound gate.
Panel and Frame Repair
Rotted stiles and racked frames are common after a wet Redmond winter. We repair the structural timber where it can be saved and flag where it can’t, so you’re not sinking money into a frame that won’t hold. On large estate panels, a partial rebuild often makes more sense than a full replacement.

Trusted Brands We Service in Redmond
We work on 9 major gate and operator brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That range matters in Redmond, because the operators here split between commercial systems on the office-park perimeters and solar and heavy-duty automation on acreage entrances. A brand-agnostic approach means we diagnose the actual fault instead of defaulting to a replacement of a system we don’t recognize. We don’t claim to stock parts on a truck, but we do know these systems, and we source what a repair needs. Turnaround stays fast because we start from the real problem. Call (855) 683-9015 for a free estimate.
Common Gate Repair Problems We See in Redmond Homes
- Solar openers fading in winter. Batteries and charge controllers on acreage swing gates lose capacity through Redmond’s damp, low-light winters, and a gate that ran all summer goes dead at the top of a long driveway. Solar systems need a real charge check before you assume the operator is finished.
- Needle litter and moss in the track. Douglas-fir needle litter and moss pack into the rack and pinion and slide-gate track on tree-lined driveways. That jams gates that ran clean all summer, and the fix is clearing and reseating before it burns out the motor.
- Wood panels swelling and sagging. Months of rain swell wooden panels and pull them out of alignment at the hinge post. Older installs also carry aging operators, so a winter call often turns up a structural sag and a tired operator at the same time.
- Fogged photo-eyes. Moisture fogs the safety photocell lenses, and the gate won’t close because the sensor keeps reading an obstruction. Drying and reseating the photo-eyes usually restores the close cycle.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Redmond, WA
Gate repair in Redmond is priced per job, by a written estimate you get before any work starts. A typical metal gate repair runs $250 to $900, and a typical wood gate repair runs $300 to $1,100, depending on panel size and structural condition. Control-board and loop-detector work on commercial automation usually sits in that same range, with the top end reserved for full operator diagnosis and repair. What moves the cost is the failure itself – a hinge adjustment is quick, while a failed post footing or a dead operator takes longer. Our estimates are free. Call (855) 683-9015 for an exact quote.
We Also Serve Cities Near Redmond
Our gate repair coverage reaches beyond Redmond into Union Hill-Novelty Hill, Sammamish, Kirkland, and Bellevue. If you manage a property or own a home in any of these areas, we handle the same work – metal and wood repair, electric and automatic gate repair, and new installation. Call (855) 683-9015 to book a free estimate.
Serving Redmond, WA – Our Local Coverage Area
We serve Redmond and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Redmond
Winter rain saturates wooden panels, needle litter fouls the rack and pinion, and the safety photocell lenses fog, so a gate that ran clean all summer stalls once the wet season starts. A qualified pro clears the rack, dries and reseats the photo-eyes, checks the hinge post for movement, and re-tunes the operator’s travel limits. Call (855) 683-9015 for an exact quote – estimates are free.
Yes, if the operator is sized to the span and the solar system is healthy. Wide acreage entrances need a heavy-duty operator matched to panel weight, and solar works where trenching in mains power is impractical – but the battery and charge controller have to keep up through Redmond’s damp, low-light winters. We check the whole setup and quote before any work. Call (855) 683-9015.
Moisture on the photocell lenses makes the sensor read a phantom obstruction, so the operator refuses to close. Drying and reseating the photo-eyes, and checking the wiring for moisture intrusion, usually restores the close cycle. Call (855) 683-9015 for a free estimate – we quote the price before starting.
Usually not. A droop that looks like a panel problem is often the hinge post moving in saturated ground, and sag correction belongs at the post rather than the panel. We check the footing and hinge post first, then realign. Call (855) 683-9015 for an exact quote on your gate – estimates are free.
We do – we work on LiftMaster, FAAC, BFT, DoorKing and 5 other major gate and operator brands across Redmond and the surrounding area. A brand-agnostic approach means we diagnose the actual fault instead of defaulting to a replacement of a system we don’t know. Call (855) 683-9015. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Get Your Gate Working Again
Whether it’s a commercial slide gate at an office park off 98052 or a solar-powered swing gate at the top of a Redmond Ridge driveway, we handle the diagnosis and the repair in a single visit. Call (855) 683-9015 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Get a gate specialist on-site, not a generalist guessing at your control board.
Written by the team at Bellevue Gate Repair.