Gate Company in Redmond - Same-Day Service, Priced Before We Start

Same-day gate service with the price agreed before we start. Licensed and insured technicians covering repairs, operators and access control across the whole service area.

✓ Licensed & Insured ✓ Written quotes ✓ Free estimates
Call (855) 683-9015

We answer 24/7

Work is performed by our local vetted partner.

Work is performed by our local vetted partner.

🛡 Licensed & Insured 📝 Written Fixed-Price Quotes 💲 Upfront Pricing · Free Estimates
Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Gate Company in Redmond, WA

Gate installation in Redmond runs into a specific set of conditions: long private driveways on Redmond Ridge and Union Hill that need a real automatic gate, and corporate or community perimeters in 98052 and 98053 that need commercial slide and swing gates tied into badge or loop access. Add a wet maritime climate that pits steel, swells wood and fogs photo-eye lenses, and you get a job that rewards a specialist rather than a generalist. We work on gates only. Call (855) 683-9015 for a free estimate.

Call (855) 683-9015

Why Redmond Homes Are Different

Redmond is a city of two gate markets living in one service radius. On one side you have the sprawling Microsoft-era office parks and gated communities around 98052 and 98053, where commercial slide and swing gates carry badge readers, loop detectors and intercom integration. On the other you have multi-acre properties off Redmond Ridge and Union Hill, where a long private driveway needs an automatic gate that opens reliably in the rain and closes behind a car that has already pulled away.

The housing stock splits the same way. Suburban tract homes built from the 1980s through the 2000s sit near downtown and the Sammamish Valley floor, while newer large-lot custom and estate homes climb the ridges. Many lots are wide enough for a driveway gate, and the older installs show their age: operators past their service life and steel posts rusting at the base.

Then there’s the weather. Damp winters with persistent rain and moss are hard on gate hardware. Steel posts and hinges pit and seize, wooden gates swell and sag, and photo-eye sensors short out from moisture. The long dry summers finish the job on wood, swelling and warping it. The result is a predictable spring spike: gates that opened fine all summer jam once winter rain saturates the wood, and operators on shaded, tree-lined driveways collect Douglas-fir needle litter and moss until the mechanism struggles.

Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Our Main Redmond Services

Most Redmond calls come down to two jobs: fixing a gate that has stopped behaving, and putting in a new one that suits the property. Here’s how each works here.

Gate Repair in Redmond

A gate that won’t open, closes too fast, or drags on the ground is usually a diagnosable problem with a known fix. In Redmond the culprit is often moisture: hinges that have seized, wooden leaves that have swelled into the post, or a latch that no longer lines up after a wet winter. We look at the mechanical structure and the operator together, because the two fail in tandem on damp driveways. If your gate needs gate repair, we diagnose the actual fault rather than defaulting to replacement.

Gate Repair in Redmond

Electric Gate Repair in Redmond

Automated gate repair is its own specialty. The high-complexity work – control boards, loop detectors, intercom integration, photo-eye alignment – is what general handymen routinely turn down, and it’s the work we do most. On Redmond’s shaded, tree-lined driveways, needle litter and moss foul the tracks, and moisture fogs the photo-eye lenses until the gate behaves erratically or refuses to move. We test the electrical side and the mechanical side in one visit. For electric gate repair, start with the operator and work outward.

Electric Gate Repair in Redmond
Need help today?Fast, friendly service and a no-obligation free estimate.

Call (855) 683-9015

Gate Installation in Redmond

Gate Installation in Redmond

Gate installation in Redmond is shaped by the lot it’s going on. A long private driveway off Redmond Ridge or Union Hill needs a gate sized for the span and the traffic, with posts set to proper footing depth in ground that stays wet through the winter. A commercial or community entrance in 98052 or 98053 needs a different animal: a slide or swing gate tied into badge and loop access. Either way, the wet maritime climate decides how long the hardware lasts, so material choice matters as much as the operator. If you’re weighing your options, our gate installation work covers the full range, and we’ll measure and quote before anything is ordered.

Automatic Gate Installation

An automatic gate takes the driveway from manual to powered, and in Redmond that usually means an operator paired with access control so the gate opens for the right vehicle and closes behind it.

Signs you need it

You’re getting out of the car to open a long driveway gate in the rain, or the existing manual gate has become a daily chore on a multi-acre property.

What it costs in Redmond

Automatic gate installation in Redmond typically runs from $2,800 to $7,500 for a residential driveway, depending on the operator, the gate leaf, and whether the power run and access control are included.

How we do it

We measure the opening, confirm the power source, set the posts and hang the gate, mount the operator, wire the safety edges and photo-eyes, then test the full cycle before we hand it over.

Electric Gate Installation

An electric gate brings power to the entrance – the operator and the access control that tells it when to open. On Redmond’s estate driveways this is the step that turns a gate into a working security layer.

Signs you need it

Your gate is manual but you want badge, keypad or remote access, or the old operator has finally failed and a modern electric system makes more sense than another repair.

What it costs in Redmond

Electric gate installation in Redmond typically falls between $2,500 and $6,800, with access control, safety edges and the power run adding to the figure.

How we do it

We plan the power run, mount the operator on a properly footed post, wire the safety edges and receivers, set the open and close limits, and cycle-test every input before we call it done.

Driveway Gate Installation

A driveway gate is the entrance to the whole property, so the install has to suit the span, the grade and the way the drive is used. Many Redmond lots are large enough to justify one.

Signs you need it

You have a long private drive and want a physical barrier at the entrance, or the old gate has rusted at the base and no longer swings clean.

What it costs in Redmond

Driveway gate installation in Redmond typically costs $1,800 to $5,000 for a manual gate, and $3,500 to $9,000 once an operator is included.

How we do it

We check the grade and the drive width, choose the gate style and material for the wet climate, set the posts to proper footing depth, hang and align the gate, and fit the hardware.

Questions about your gate repair?Free estimate, price agreed before work starts
Call (855) 683-9015

What Gate Installation Costs in Redmond

Item Typical range in Redmond
Manual driveway gate installation $1,800 – $5,000
Automatic gate installation (residential) $2,800 – $7,500
Electric gate installation with access control $2,500 – $6,800

Can you install a gate on a long Redmond Ridge driveway?

Yes. Long driveways on Redmond Ridge and Union Hill are exactly the kind of span we size gates for, and posts get set to proper footing depth so wet winter ground doesn’t shift them. We measure on-site before quoting.

Do you handle the power run and the safety edges for an electric gate?

Yes. Electrical planning, the power run, safety edges and photo-eye wiring are all part of an electric gate install for us, not a handoff. We test every input before the gate goes into service.

Brands We Service in Redmond

We’re familiar with the operators you’ll find across Redmond: LiftMaster, FAAC, Elite and Mighty Mule among them. Whether your operator is a LiftMaster or a Mighty Mule, we diagnose the system rather than replace it on sight. See our brands for the full roster and typical turnaround on each.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade
Want to talk it through?Free estimate, price agreed before work starts
Call (855) 683-9015

Pricing for Gate Company in Redmond, WA

Service Typical range in Redmond
Manual driveway gate installation $1,800 – $5,000
Automatic gate installation (residential) $2,800 – $7,500
Electric gate installation with access control $2,500 – $6,800

What pushes price up in Redmond is usually material and complexity: a steel gate built for the wet climate costs more than a wood one, and access control, the power run and safety edges add to an electric install. The written estimate sets the final price, and we quote and agree it before any work starts.

Neighborhoods We Serve in Redmond

We work across Redmond, from the office parks and gated communities in 98052 and 98053 to the estate lots that climb Redmond Ridge and Union Hill. The older streets near downtown and the Sammamish Valley floor are in range too. Whether your gate sits at a commercial perimeter entrance or the end of a long private drive, we can get a specialist out to look at it.

  • Redmond Ridge
  • Union Hill
  • Downtown Redmond and the Sammamish Valley floor
  • The gated communities of 98052 and 98053

One note on timing: Redmond’s shaded, tree-lined driveways collect needle litter and moss all year, so spring is our busiest season for gate calls. Book early if that’s when yours acts up.

Service Area – Cities Near Redmond

Redmond sits in the middle of our Eastside coverage, and the gate conditions on its rural estates and corporate perimeters are shared with the towns around it. If you’re just outside the city line, we serve Union Hill-Novelty Hill, WA, Sammamish, WA, Kirkland, WA and Bellevue, WA as well. Same wet climate, same hardware problems, same specialist approach. Call (855) 683-9015 and we’ll confirm your address is in range.

Serving Redmond, WA – Our Local Coverage Area

We serve Redmond and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs About Gate Company in Redmond

Ready to get started? Free estimates · 30-60 min response in Redmond
Call (855) 683-9015

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local gate repair pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    A background-checked tech heads outLicensed & insured, typically within 30-60 min.
  4. 4
    You approve before work beginsNothing starts until you say go.

What Redmond Customers Say

★★★★★ 4.9 from 8+ reviews

"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."

- Allison Ziegler

"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."

- Jason Norris

"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."

- Paul Reed

How It Works in Redmond

Getting your gate repair handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your gate repair needs and we provide an upfront, transparent quote with no obligation and no hidden fees.

2

Licensed Technician Dispatched

A background-checked, certified technician arrives in Redmond - typically within 30-60 minutes.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and satisfaction guarantee.

Request a Free Estimate

Tell us what's going on in Redmond. We'll get back to you fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - We Answer 24/7
Local Service Coverage
Call Now - We Answer 24/7