Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Union Hill-Novelty Hill, WA
Gate installation in Union Hill-Novelty Hill is a different job than it is almost anywhere else in King County. This is a semi-rural, unincorporated enclave of multi-acre estate lots and horse properties off Redmond-Fall City Road, where a gate usually opens a long private lane or a pasture rather than a short suburban driveway. We’re a gate-only company: repair, electric gate repair, and installation, nothing bolted on the side. If you’re planning a new automated drive gate, or the one you have has started acting up, call (855) 683-9015. We answer 24/7.
Why Union Hill-Novelty Hill Homes Are Different
Most of the housing here is custom and estate construction from the 1980s through the 2000s, sitting on parcels from about two to ten acres. Detached shops and barns are common, and the driveways that reach them are long, gravel or paved, and often shared by service vehicles and horse trailers. That changes the gate conversation entirely. A gate at the end of a hundred-foot private lane has to survive heavy-vehicle cycle counts, not just the family car coming and going.
The structures themselves are usually welded steel or ornamental tube gates hung on masonry or steel posts, often paired with an older slide or swing operator and buried low-voltage control wiring. The foothill climate off the Sammamish Plateau adds months of wet, moss-and-mildew conditions, occasional lowland snow, and wind. What fails first is almost always hardware, hinge points, and the photo-eye and laser safety sensors on those exposed runs: pasture dust, spider webs, and nearby mounted lights disable or misalign them, so an operator that just stops is frequently a sensor problem rather than a dead motor.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Union Hill-Novelty Hill Services
Two calls bring Union Hill-Novelty Hill homeowners and property managers to us most often: a gate that has stopped or started behaving oddly, and a new gate for a lane that never had one.
Gate Repair in Union Hill-Novelty Hill
On these long estate drives, repair work usually centers on hinge points, sagging panels, track wear on slide gates, and hardware that has taken years of wet weather. We diagnose the mechanical gate first, because a panel dragging on its track will fool an operator into thinking it has a motor fault. Sag is the usual culprit on older steel gates, and it’s fixable without replacing the gate. If your gate is sticking, off its line, or grinding, that’s a known problem with a known fix: gate repair for Union Hill-Novelty Hill properties starts with an on-site look at the whole structure, not just the box on the post.

Electric Gate Repair in Union Hill-Novelty Hill
Automated repair here means the electrical side: control boards, loop detectors, buried low-voltage wiring, and sensor alignment on exposed driveway runs. The recurring failure we see on Union Hill-Novelty Hill estate lots is a safety photo-eye knocked out by pasture dust, cobwebs, or a mounted light shining into the lens. The operator reads a blocked beam and refuses to move, and it looks like a dead motor. It usually isn’t. We diagnose both the mechanical gate and its automation on one visit, which matters when the gate is far from the house. For the electrical and operator side, see electric gate repair.

Gate Installation in Union Hill-Novelty Hill

Installing a gate out here starts with the lane. A Union Hill-Novelty Hill estate drive is long, often shared with a barn or shop, and traveled by trailers and service trucks, so the gate has to be sized and hung for that weight of use rather than for a sedan pulling in twice a day. The foothill climate pushes the same decision further: welded steel and ornamental tube gates on masonry or steel posts stand up to wet, moss, and wind far better than light tube that flexes and rusts at the welds. Full Gate Installation here means measuring the opening, setting posts to proper footing depth, hanging the gate, and commissioning the operator and its safety devices together.
Driveway Gate Installation
Signs you need it
You’re building or buying an estate lot with a long private lane and no gate, or the existing gate is undersized for the trailers and service vehicles that now use the drive.
What it costs in Union Hill-Novelty Hill
A new driveway gate typically runs $2,500 to $6,500 for the gate and posts, and an operator adds $1,200 to $3,500 depending on the drive’s width and slope – the written estimate sets the final price.
How we do it
We measure the opening and check the grade, set the posts to proper footing depth, hang and level the gate, then wire and commission the operator with its safety photo-eyes aligned to the lane.
Automatic Gate Installation
Signs you need it
The lane is long enough that getting out to open a manual gate twice a day has stopped making sense, or the existing operator no longer matches the gate it’s driving.
What it costs in Union Hill-Novelty Hill
Automation on a new or existing swing or slide gate typically runs $1,200 to $3,500 for the operator, controls, and safety edges, and the written estimate before work starts sets the final price.
How we do it
We confirm the gate’s weight and travel, match an operator to the cycle count the drive actually sees, run the low-voltage control wiring, and set the safety devices so the gate reverses on obstruction.
What Gate Installation Costs in Union Hill-Novelty Hill
| Item | Typical range in Union Hill-Novelty Hill |
|---|---|
| New driveway gate and posts | $2,500 – $6,500 |
| Automatic operator, controls, and safety edges | $1,200 – $3,500 |
| Sliding gate on a track with operator | $4,000 – $9,000 |
Can you install a gate for an automated estate lane in Union Hill-Novelty Hill?
Yes. We size the gate and operator for a long private drive shared with trailers and service vehicles, set posts to proper footing depth, and align the safety photo-eyes to the lane. Installation is measured and scheduled, not same-day.
Do you handle the power and safety edges on a new gate?
Yes. We run the low-voltage control wiring, set the safety edges and photo-eyes, and commission the operator so the gate reverses on obstruction. The written estimate covers the full job before any work begins.
Brands We Service in Union Hill-Novelty Hill
We’re fluent in nine gate and operator brands, and the ones that turn up most on these estate drives are LiftMaster, Elite, FAAC, and Mighty Mule. Whether your operator is a LiftMaster or a Mighty Mule, we diagnose the actual fault instead of defaulting to replacement. See our brands for the full roster. Turnaround depends on the part; we’ll tell you what’s needed up front.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Union Hill-Novelty Hill, WA
Every figure below is typical and estimated, and the written estimate sets the final price before work starts.
| Service | Typical range in Union Hill-Novelty Hill |
|---|---|
| New driveway gate and posts | $2,500 – $6,500 |
| Automatic operator, controls, and safety edges | $1,200 – $3,500 |
| Sliding gate on a track with operator | $4,000 – $9,000 |
Price climbs with the length and slope of the lane, the gate’s material and weight, and how far the control wiring has to run from the house or shop. Because these drives are long, wiring and sensor work often account for more of a Union Hill-Novelty Hill install than the gate itself. You get a written quote and agree to it before any work starts, so there’s no surprise on the invoice.
Neighborhoods We Serve in Union Hill-Novelty Hill
We work the estate lanes and horse properties across Union Hill-Novelty Hill and the surrounding foothill roads off Redmond-Fall City Road. Because many of these gates sit far back from the road on long private drives, we ask for the driveway entrance and any gate code when you call so the technician reaches the right gate on the first trip. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
- Union Hill
- Novelty Hill
- Redmond-Fall City Road corridor
- Surrounding estate and horse-property lanes
Service Area – Cities Near Union Hill-Novelty Hill
Union Hill-Novelty Hill sits between several communities we cover, and gate work on these estate lots often connects to them. We serve Sammamish, WA, Redmond, WA, Bellevue, WA, and Kirkland, WA, and our home base of operations is Bellevue Gate Repair. If your property straddles a line or your gate faces one of these cities, call and we’ll confirm coverage.
Serving Union Hill-Novelty Hill, WA – Our Local Coverage Area
We serve Union Hill-Novelty Hill and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in Union Hill-Novelty Hill
Call (855) 683-9015. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. We’re closed Saturday, so a gate failure that day is booked into the next opening. Same-day service is often possible for repair calls.
Union Hill-Novelty Hill is unincorporated, so permit rules fall to King County rather than a city. Whether you need one depends on the gate and its posts, so ask King County’s permitting office before building. We set posts to proper footing depth regardless of what’s required.
Yes. We serve the estate and horse properties across Union Hill-Novelty Hill off Redmond-Fall City Road, plus the neighboring cities of Sammamish, Redmond, Bellevue, and Kirkland. Give us the driveway entrance and any gate code when you call so we reach the right gate.
Ready to sort out a gate on your Union Hill-Novelty Hill property? Whether you need a new automated drive gate for a long estate lane, a sensor realigned, or an operator diagnosed, call (855) 683-9015 for a free estimate. Our technicians have up to experience, we work on residential, multi-family, and commercial gate systems, and the price is quoted and agreed before any work starts. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within 30-60 min.
- 4You approve before work beginsNothing starts until you say go.
What Union Hill-Novelty Hill Customers Say
"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
- Allison Ziegler"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
- Jason Norris"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
- Paul Reed