Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Mercer Island
If your electric gate has stopped opening, is reversing at the wrong moment, or an operator is grinding away inside the housing, we get that kind of work across Mercer Island every week. This is a narrow specialty: automated gates on private lanes, estate entries and waterfront lots, with control boards, loop detectors and intercoms that general handymen won’t touch. We know the island’s wet marine air and the way it eats hardware, so we plan for corrosion rather than just swapping a part. Call (855) 683-9015 for a free estimate on any gate that’s misbehaving. We answer 24/7, and fast dispatch runs from 7am to 7pm.

Island drivers know the I-90 bridge chokepoints all too well. A gate stuck open on a secluded lane or a waterfront property is an access and security headache residents want solved quickly, and it helps to have a specialist who works the island regularly.
Why Mercer Island Homeowners Call Bellevue Gate Repair for Electric Gate Repair
We’re a dedicated gate company, and gate work is all we do. That focus matters on an island where the average gate is a heavy wrought-iron, cedar or steel installation on a premium property, not a light chain-link unit. Our technicians have up to experience, and they diagnose both the mechanical gate structure and its electrical components in a single visit, so you’re not bounced between trades.
Mercer Island owners tend to call us because the first person out the last time replaced a control board before anyone tested the loop detector. We work the other way: find the actual fault, then quote. Our technicians are trained on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite and Mighty Mule systems, which gives us diagnostic range most single-brand shops simply don’t have.
We serve Mercer Island property owners directly, whether that’s a single estate home, an HOA with a shared entry gate, or a commercial lot near the business district. If you want a gate specialist on-site instead of a generalist guessing at your control board, call (855) 683-9015. Estimates are free, and the price is agreed in writing before any work starts.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Commercial Gate Operator in Mercer Island
A Commercial Gate Operator in Mercer Island usually means a high-duty slide or swing operator on a shared entry: an HOA drive, a multi-family access road, a business lot, or a private lane serving several estate properties. The job involves far more than the motor itself. On the island it means checking loop detectors that trigger the gate at approach, safety edges and photocells, keypad and intercom integration, and the wiring that runs out to the operator housing. Salt air and year-round moisture attack that wiring long before the motor fails, so the boards and connections are where we look first.
A Mercer Island homeowner with a shared gate or a property manager handling an HOA entry calls when vehicles are queuing, when the gate fails to close after a storm, or when the keypad stops accepting codes. Expect a typical commercial operator repair on Mercer Island to run roughly $450 to $1,200 depending on whether it’s one component, a control board, or a full operator replacement. The written estimate sets the final price.
Loop Detectors and Access Integration
Loop detectors and keypad systems take the most punishment from moisture here. When a vehicle doesn’t trigger the gate, or a resident’s code stops working, the fault is often a corroded connection at the loop or a waterlogged keypad, not the operator. We test each access point separately so the fix lands on the right part.
High-Duty Operators for Shared Entries
Shared drives need a heavier operator than a single home. We match cycle ratings to real traffic, then stress the safety side. If a gate serves multiple properties and the operator keeps cutting out under load, the sizing was likely wrong from the start.
Gate Opener Repair in Mercer Island
Gate Opener Repair in Mercer Island starts with the housing, because that’s where the marine climate does its damage. The opener may be a LiftMaster or FAAC unit that’s run for years without trouble, then starts intermittent-failing whenever the weather turns wet. Moisture gets into the operator board and corrodes the terminals, and salt-laden air speeds that up. Opening the housing and finding green corrosion on the board is common on the island, and it’s a diagnosable problem with known fixes.
A typical opener repair in Mercer Island runs $250 to $650, higher if the control board needs replacing rather than a terminal cleanup and reseal. When the opener has simply reached the end of its service life, replacement is the more sensible spend. Either way, we quote before we touch anything and you approve the number first.
Moisture Damage and Control Boards
Intermittent failures that clear up on a dry day point at the board or its connections. We remove corrosion, reseal the housing properly, and test the opener through a full open-close-reverse cycle. A board that’s been eaten through gets replaced rather than cleaned and hoped over.

Power Runs and Safety Edges
Yes, we handle the power run and the safety edges on an automated gate. The safety side is the part that matters most, because a gate that fails to reverse on an obstacle is dangerous. We test the photocells, the safety edge and the reversing sensitivity after any opener work.
Trusted Brands We Service in Mercer Island
We work on LiftMaster, FAAC, BFT, Elite and Mighty Mule systems regularly, along with Linear, Viking, Ghost Controls and DoorKing operators. We don’t claim to carry every part in stock. What we do is know how these systems are built, so we diagnose the real fault instead of defaulting to a replacement because the brand isn’t familiar. For a Mercer Island estate with a FAAC swing operator or a LiftMaster slide unit, that means one visit, a clear answer, and a written price rather than a parts chase. The turnaround stays tight because we understand the equipment, and we can work with the brand’s own service channels when a specific board or component is needed.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in Mercer Island Homes
- Hinge post corrosion and footing settlement. Mercer Island’s wet, clay-heavy soil shifts under older gate posts, and painted hinges rust at the weld points. The gate sags and drags long before the panel itself fails.
- Operator board and wiring corrosion. Year-round moisture and salt air get into LiftMaster, FAAC and BFT housings, causing intermittent failures that come and go with the weather.
- Moss, algae and cedar swelling on slide gates. Tracks and rack-and-pinion assemblies foul up with growth through the wet months, and cedar panels swell and misalign the latch points.
- Storm damage and dead power. Winter windstorms bring fallen limbs onto gate arms, and the resulting outages strand automatic operators open or closed. Older 1950s to 1970s manual gates being upgraded to openers often need structural checks before a motor goes on.
A typical Mercer Island estate job often goes like this. A heavy wrought-iron swing gate starts to sag and drag because the hinge post footing has shifted. The original painted hinges are rusting at the welds. A qualified local pro surveys the hinge post and footing first, corrects the sag at the source instead of patching the panel, then replaces the corroded fasteners with stainless steel and treats or refinishes any galvanised surfaces. If the operator is a LiftMaster or FAAC, they check the safety photocell and loop detector so the gate reverses properly, and confirm the keypad entry still works after the storm season.
Pricing for Electric Gate Repair in Mercer Island, WA
Pricing on Mercer Island reflects the hardware. Estate and driveway gates here are automated wrought-iron, cedar and steel, so the work is precision service on premium systems rather than quick fixes. Typical estimated ranges:
- Gate opener repair: $250 to $650
- Control board replacement: $400 to $900
- Hinge, latch and hardware replacement: $200 to $500
- Commercial gate operator repair: $450 to $1,200
- Keypad, remote or safety sensor repair: $150 to $400
What moves a job toward the top of a range: a post that needs re-footing, an operator housing that’s been wet for years, or a control board that’s corroded beyond cleanup. Smaller fixes land near the bottom. Every estimate is free, and the price is quoted and agreed before any work starts, so the invoice matches the number you approved. Call (855) 683-9015 for an exact figure.
We Also Serve Cities Near Mercer Island
We handle electric gate repair on the mainland too, including Bellevue, Newcastle, Bryn Mawr-Skyway and Kirkland. Same diagnostics, same brand coverage, same written quote before the work begins. If you’re on Mercer Island or just across either bridge, reach out and we’ll get you scheduled for a free estimate.
Serving Mercer Island, WA – Our Local Coverage Area
We serve Mercer Island and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Mercer Island
Salt-laden marine air accelerates corrosion on gate hardware, so parts fail years sooner on Mercer Island than they would inland. Stainless steel fasteners and galvanised steel aren’t optional upgrades here; they’re baseline. Painted steel that lasts years in Bellevue can pit and rust far faster on the island, so we spec hardware for the marine microclimate. Call (855) 683-9015 for a free estimate.
Yes, and it needs attention right away. A gate that won’t reverse on an obstacle is dangerous, especially on older estates where photocells and safety edges have been exposed to years of moisture. We test the safety side every visit and correct it before anything else. Call (855) 683-9015.
Because the hinge post carries the load, and the island’s wet, clay-heavy soil lets it shift over time. Painted hinges also rust at the welds, so the gate drags before the panel itself shows any problem. Correcting the footing fixes the sag at the source. Call (855) 683-9015.
It can, with the right sizing and hardware for the site’s exposure. Waterfront cedar needs swelling considered at the latch points, and salt air means stainless fixings throughout. We measure the gate and site first, then quote a written price before anything is ordered. Call (855) 683-9015.
LiftMaster, FAAC, BFT, Elite, Mighty Mule, Linear, Viking, Ghost Controls and DoorKing all show up on the island. We work on all nine and diagnose the actual fault rather than replacing an unfamiliar system. Call (855) 683-9015 for a free estimate.
Ready to get your gate working properly? Call (855) 683-9015 for a free estimate on electric gate repair in Mercer Island. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Our team will diagnose the fault, explain your options, and give you a written price before any work starts.
Written by the team at Bellevue Gate Repair.