Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Electric Gate Repair Across Sammamish
When your gate stops halfway up the driveway or the operator starts tripping every few cycles, you need a gate specialist who understands what Sammamish lots do to a gate over time. We work on electric gates across the Sammamish plateau, from Klahanie up through the wooded parcels off the 98074 and 98075 ridges, and we know these are not city gates. They sit far back on sloped, fir-shaded driveways where debris and soil movement drive most failures. Our technicians have up to experience, and every call starts with a real diagnosis of the structure and the automation together. Call (855) 683-9015. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Why Sammamish Homeowners Call Bellevue Gate Repair for Electric Gate Repair
Automated gate repair is its own specialty, and it’s all we do. Most home-service companies treat a gate operator as a side job, so the control board gets swapped or the whole system gets condemned before anyone checks the track, the footing or the alignment. We don’t work that way. Our trades are gate repair, electric gate repair and gate installation, nothing else, and that focus is why Sammamish homeowners, HOA managers and property operators keep calling us back.
We’re fluent in nine gate and operator brands, including LiftMaster, FAAC and Mighty Mule, so the system on your property isn’t a mystery to us. When a gate won’t open, closes too fast or the operator is grinding, those are diagnosable problems with known fixes, and we approach them brand-agnostically: we find the actual fault rather than defaulting to replacement. Belt and chain operators, slide hardware, control boards, loop detectors and intercom integration all fall into the same visit.
Sammamish calls matter because of where the gate sits. A slide gate at the end of a steep, tree-lined run can fail for reasons that have nothing to do with the operator, and a generalist will miss that. Our technicians have up to experience reading exactly that kind of site. Prices are quoted and agreed before any work starts, so the written estimate is the number you pay.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Automatic Gate Repair in Sammamish
Automatic Gate Repair in Sammamish usually comes down to a slide gate or swing gate that has lost its clean, full travel because something on the property moved or fouled the run. These aren’t urban gates. On the larger estate lots the gate can be a hundred feet or more from the house, at the top of a steep driveway, shaded by Douglas fir and cedar most of the day. That setup changes what fails first. A typical automatic gate repair visit in Sammamish runs $250-$650 depending on what’s actually wrong, and the written estimate locks the price before we touch anything.
Track and Rack Pinion Clearing
Fir needles, moss and storm debris pack the track and the rack and pinion on a long setback slide gate, which stalls the travel or trips the operator’s obstruction sensing. Clearing the run and checking the post footing is part of the repair, not an afterthought. We confirm the gate travels the full length cleanly before we call the job done.
Hinge Post and Sag Correction
On shared driveways and rights of way, a swing gate that no longer clears the pavement usually has a footing problem under the hinge post. Slope runoff and settled soil shift that post, and the gate sags and drags. We correct the sag and re-check the operator’s limit settings after the geometry is right again.
Electric Gate Motor in Sammamish
Electric Gate Motor work in Sammamish often follows the same pattern: a LiftMaster or FAAC operator that has been straining against a fouled track finally trips out or starts overheating. The motor is blamed first, but a motor that runs hot on a debris-packed slide gate is doing its job; the load on it is the problem. A typical gate motor repair or replacement in Sammamish runs $400-$1,200 for the operator portion, and the estimate is written and agreed before any work starts. Our technicians have up to experience diagnosing exactly this.
Operator Diagnostics
A motor that runs but doesn’t move the gate, or moves it and stalls, points to different faults. We test the operator under load and separate a motor problem from a control board or power problem. The fix follows the diagnosis, not the other way around.

Safety Photocell and Loop Alignment
On a restricted driveway the beam between the photocells gets knocked out of line by a car or a fallen bough, and the gate refuses to close. We realign the sensors and confirm the loop detector still reads correctly. Safety devices that don’t work are not something we leave behind.
Trusted Brands We Service in Sammamish
We work on LiftMaster, FAAC, Mighty Mule and the other major gate and operator brands regularly, and we diagnose the system in front of us rather than defaulting to a replacement because the brand is unfamiliar. Whether your operator is a LiftMaster or a Mighty Mule, the same discipline applies: isolate the fault, confirm the structure and the automation agree, then write the fix. We don’t claim to stock parts locally, because a gate has no universal shelf. What we do is get the right part for your system and turn the repair around without a second trip. For a gate that has been down for a while, that matters. Call (855) 683-9015 for a free estimate.
See the difference
Before
After
Before
After
Before
AfterCommon Electric Gate Repair Problems We See in Sammamish Homes
- Debris-packed slide tracks. Fir needles and moss collect in the track and rack and pinion on a long setback slide gate, and the operator eventually trips or stalls. This is the single most common failure on wooded Sammamish parcels, and clearing the run is the first step.
- Post footing shift on a slope. Winter runoff and settled soil move the footing under a hinge post, so a swing gate sags and drags instead of clearing the driveway. On steep, tree-lined drives this is often the real cause behind a gate that “won’t close right.”
- Operator strain on restricted driveways. A slide gate squeezed onto a shared right of way has a short, precise track and safety beam alignment, and any drift from that alignment shows up as an operator that trips or reverses. Precision here is not optional.
- Storm and limb impact. Heavy fir boughs and toppled limbs in a windstorm bend gates, knock the track out of level and shift posts on the settled slope. A post-storm check of both the structure and the operator catches the damage before it turns into a motor replacement.
Pricing for Electric Gate Repair in Sammamish, WA
We price electric gate repair per job, after an on-site look, and the written estimate is the price. Typical ranges in Sammamish: an automatic gate repair visit runs $250-$650, gate motor repair or replacement runs $400-$1,200 for the operator portion, and a control board or safety sensor fault runs $180-$450. Those ranges reflect the long setback runs and sloped sites common on the plateau, where clearing debris and re-leveling a track is part of the work. What moves a job up or down is whether the fault is in the structure or the automation, and whether parts need ordering. The estimate is free, and nothing is charged until you agree to it in writing. Call (855) 683-9015 for a written estimate.
We Also Serve Cities Near Sammamish
The same gate-only work carries into Sammamish and the neighboring communities of Union Hill-Novelty Hill, Redmond, Issaquah and Bellevue. If your gate is on a wooded slope in Union Hill or a tight shared driveway off the Redmond road, we treat it the same way: diagnose the structure and the operator together. Explore our electric gate repair team’s full service line if you want more detail. Call (855) 683-9015 for a free estimate.
Serving Sammamish, WA – Our Local Coverage Area
We serve Sammamish and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Electric Gate Repair in Sammamish
Your slide gate stops partway because the operator is sensing an obstruction – most often debris, moss or a shifted track on a long setback run. Clear the track and rack and pinion, then check that the gate travels the full length cleanly on its own. If it still stalls, the fault is in the operator, the control board or the loop detector, and that needs a technician. Call (855) 683-9015 for an exact quote – estimates are free.
A swing gate can work on a narrow shared driveway, but the swing arc has to clear the pavement and the vehicle path, which on a tight right of way is often impossible. When space is that restricted, a slide gate is usually the practical answer, and its track and safety beam need precise alignment. We’ll look at the site and tell you honestly which fits. Call (855) 683-9015 for a free estimate.
A gate sags at the hinge side because the footing under the hinge post has shifted – on sloped, forested lots, winter runoff and settled soil are usually the reason. The gate then drags and fails to clear the driveway. Correcting the footing and re-leveling the gate is a structural fix that has to come before any operator adjustment. Call (855) 683-9015 for a free estimate.
Your operator trips after windstorms because fallen fir boughs and debris pack the track and rack and pinion, or a limb has knocked a post or shifted the track out of level. The operator is reading the obstruction correctly. Clear the run and check the structure, then confirm the safety photocell and loop still work. Call (855) 683-9015 for a free estimate.
Yes – your electric gate needs working safety sensors, both for safe operation and because a failed photocell or loop detector is a common cause of a gate that won’t close. We test and realign the sensors on every repair visit. A gate with dead safety devices is not something we leave running. Call (855) 683-9015. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Bellevue Gate Repair.