Gate Company in Union Hill-Novelty Hill - Same-Day Service, Priced Before We Start

Same-day gate service with the price agreed before we start. Licensed and insured technicians covering repairs, operators and access control across the whole service area.

✓ Licensed & Insured ✓ Written quotes ✓ Free estimates
Call (855) 683-9015

We answer 24/7

Work is performed by our local vetted partner.

Work is performed by our local vetted partner.

🛡 Licensed & Insured 📝 Written Fixed-Price Quotes 💲 Upfront Pricing · Free Estimates
Wrought ironWrought iron
Wood & steel frameWood & steel frame
Farm & ranchFarm & ranch
Sliding driveway gatesSliding driveway gates
LiftMaster operatorsLiftMaster operators
Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Get your free estimate

Gate Company in Union Hill-Novelty Hill, WA

Gate installation in Union Hill-Novelty Hill is a different job than it is almost anywhere else in King County. This is a semi-rural, unincorporated enclave of multi-acre estate lots and horse properties off Redmond-Fall City Road, where a gate usually opens a long private lane or a pasture rather than a short suburban driveway. We’re a gate-only company: repair, electric gate repair, and installation, nothing bolted on the side. If you’re planning a new automated drive gate, or the one you have has started acting up, call (855) 683-9015. We answer 24/7.

Call (855) 683-9015

Why Union Hill-Novelty Hill Homes Are Different

Most of the housing here is custom and estate construction from the 1980s through the 2000s, sitting on parcels from about two to ten acres. Detached shops and barns are common, and the driveways that reach them are long, gravel or paved, and often shared by service vehicles and horse trailers. That changes the gate conversation entirely. A gate at the end of a hundred-foot private lane has to survive heavy-vehicle cycle counts, not just the family car coming and going.

The structures themselves are usually welded steel or ornamental tube gates hung on masonry or steel posts, often paired with an older slide or swing operator and buried low-voltage control wiring. The foothill climate off the Sammamish Plateau adds months of wet, moss-and-mildew conditions, occasional lowland snow, and wind. What fails first is almost always hardware, hinge points, and the photo-eye and laser safety sensors on those exposed runs: pasture dust, spider webs, and nearby mounted lights disable or misalign them, so an operator that just stops is frequently a sensor problem rather than a dead motor.

Explore

Styles & brands we work with

  • Wrought iron
  • Wood & steel frame
  • Farm & ranch
  • Sliding driveway gates
  • LiftMaster operators

Our Main Union Hill-Novelty Hill Services

Two calls bring Union Hill-Novelty Hill homeowners and property managers to us most often: a gate that has stopped or started behaving oddly, and a new gate for a lane that never had one.

Gate Repair in Union Hill-Novelty Hill

On these long estate drives, repair work usually centers on hinge points, sagging panels, track wear on slide gates, and hardware that has taken years of wet weather. We diagnose the mechanical gate first, because a panel dragging on its track will fool an operator into thinking it has a motor fault. Sag is the usual culprit on older steel gates, and it’s fixable without replacing the gate. If your gate is sticking, off its line, or grinding, that’s a known problem with a known fix: gate repair for Union Hill-Novelty Hill properties starts with an on-site look at the whole structure, not just the box on the post.

Gate Repair in Union Hill-Novelty Hill

Electric Gate Repair in Union Hill-Novelty Hill

Automated repair here means the electrical side: control boards, loop detectors, buried low-voltage wiring, and sensor alignment on exposed driveway runs. The recurring failure we see on Union Hill-Novelty Hill estate lots is a safety photo-eye knocked out by pasture dust, cobwebs, or a mounted light shining into the lens. The operator reads a blocked beam and refuses to move, and it looks like a dead motor. It usually isn’t. We diagnose both the mechanical gate and its automation on one visit, which matters when the gate is far from the house. For the electrical and operator side, see electric gate repair.

Electric Gate Repair in Union Hill-Novelty Hill
Need help today?Fast, friendly service and a no-obligation free estimate.

Call (855) 683-9015

Gate Installation in Union Hill-Novelty Hill

Gate Installation in Union Hill-Novelty Hill

Installing a gate out here starts with the lane. A Union Hill-Novelty Hill estate drive is long, often shared with a barn or shop, and traveled by trailers and service trucks, so the gate has to be sized and hung for that weight of use rather than for a sedan pulling in twice a day. The foothill climate pushes the same decision further: welded steel and ornamental tube gates on masonry or steel posts stand up to wet, moss, and wind far better than light tube that flexes and rusts at the welds. Full Gate Installation here means measuring the opening, setting posts to proper footing depth, hanging the gate, and commissioning the operator and its safety devices together.

Driveway Gate Installation

Signs you need it

You’re building or buying an estate lot with a long private lane and no gate, or the existing gate is undersized for the trailers and service vehicles that now use the drive.

What it costs in Union Hill-Novelty Hill

A new driveway gate typically runs $2,500 to $6,500 for the gate and posts, and an operator adds $1,200 to $3,500 depending on the drive’s width and slope – the written estimate sets the final price.

How we do it

We measure the opening and check the grade, set the posts to proper footing depth, hang and level the gate, then wire and commission the operator with its safety photo-eyes aligned to the lane.

Automatic Gate Installation

Signs you need it

The lane is long enough that getting out to open a manual gate twice a day has stopped making sense, or the existing operator no longer matches the gate it’s driving.

What it costs in Union Hill-Novelty Hill

Automation on a new or existing swing or slide gate typically runs $1,200 to $3,500 for the operator, controls, and safety edges, and the written estimate before work starts sets the final price.

How we do it

We confirm the gate’s weight and travel, match an operator to the cycle count the drive actually sees, run the low-voltage control wiring, and set the safety devices so the gate reverses on obstruction.

What Gate Installation Costs in Union Hill-Novelty Hill

Item Typical range in Union Hill-Novelty Hill
New driveway gate and posts $2,500 – $6,500
Automatic operator, controls, and safety edges $1,200 – $3,500
Sliding gate on a track with operator $4,000 – $9,000

Can you install a gate for an automated estate lane in Union Hill-Novelty Hill?

Yes. We size the gate and operator for a long private drive shared with trailers and service vehicles, set posts to proper footing depth, and align the safety photo-eyes to the lane. Installation is measured and scheduled, not same-day.

Questions about your gate repair?Free estimate, price agreed before work starts
Call (855) 683-9015

Do you handle the power and safety edges on a new gate?

Yes. We run the low-voltage control wiring, set the safety edges and photo-eyes, and commission the operator so the gate reverses on obstruction. The written estimate covers the full job before any work begins.

Brands We Service in Union Hill-Novelty Hill

We’re fluent in nine gate and operator brands, and the ones that turn up most on these estate drives are LiftMaster, Elite, FAAC, and Mighty Mule. Whether your operator is a LiftMaster or a Mighty Mule, we diagnose the actual fault instead of defaulting to replacement. See our brands for the full roster. Turnaround depends on the part; we’ll tell you what’s needed up front.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade
Want to talk it through?Free estimate, price agreed before work starts
Call (855) 683-9015

Pricing for Gate Company in Union Hill-Novelty Hill, WA

Every figure below is typical and estimated, and the written estimate sets the final price before work starts.

Service Typical range in Union Hill-Novelty Hill
New driveway gate and posts $2,500 – $6,500
Automatic operator, controls, and safety edges $1,200 – $3,500
Sliding gate on a track with operator $4,000 – $9,000

Price climbs with the length and slope of the lane, the gate’s material and weight, and how far the control wiring has to run from the house or shop. Because these drives are long, wiring and sensor work often account for more of a Union Hill-Novelty Hill install than the gate itself. You get a written quote and agree to it before any work starts, so there’s no surprise on the invoice.

Neighborhoods We Serve in Union Hill-Novelty Hill

We work the estate lanes and horse properties across Union Hill-Novelty Hill and the surrounding foothill roads off Redmond-Fall City Road. Because many of these gates sit far back from the road on long private drives, we ask for the driveway entrance and any gate code when you call so the technician reaches the right gate on the first trip. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.

  • Union Hill
  • Novelty Hill
  • Redmond-Fall City Road corridor
  • Surrounding estate and horse-property lanes

Service Area – Cities Near Union Hill-Novelty Hill

Union Hill-Novelty Hill sits between several communities we cover, and gate work on these estate lots often connects to them. We serve Sammamish, WA, Redmond, WA, Bellevue, WA, and Kirkland, WA, and our home base of operations is Bellevue Gate Repair. If your property straddles a line or your gate faces one of these cities, call and we’ll confirm coverage.

Serving Union Hill-Novelty Hill, WA – Our Local Coverage Area

We serve Union Hill-Novelty Hill and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs About Gate Company in Union Hill-Novelty Hill

Ready to get started? Free estimates · 30-60 min response in Union Hill-Novelty Hill
Call (855) 683-9015

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local gate repair pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    A background-checked tech heads outLicensed & insured, typically within 30-60 min.
  4. 4
    You approve before work beginsNothing starts until you say go.

What Union Hill-Novelty Hill Customers Say

★★★★★ 4.9 from 8+ reviews

"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."

- Allison Ziegler

"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."

- Jason Norris

"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."

- Paul Reed

How It Works in Union Hill-Novelty Hill

Getting your gate repair handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your gate repair needs and we provide an upfront, transparent quote with no obligation and no hidden fees.

2

Licensed Technician Dispatched

A background-checked, certified technician arrives in Union Hill-Novelty Hill - typically within 30-60 minutes.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and satisfaction guarantee.

Request a Free Estimate

Tell us what's going on in Union Hill-Novelty Hill. We'll get back to you fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Send a Text
Call Now - We Answer 24/7
Local Service Coverage
Call Now - We Answer 24/7