Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Sammamish, WA
Sammamish driveways often run long and steep through Douglas fir and cedar, and the gate at the end of them is usually a custom ornamental or sliding unit that’s been quietly fighting rain, moss and shade for years. When that gate stops tracking straight or the operator quits, the fix rarely matches what a general handyman expects. We’re a gate-only company: gate installation, gate repair, and electric gate repair, nothing else. Our technicians have up to experience, and we work on residential estates, HOA entrances, and commercial gates across the Sammamish plateau. Call (855) 683-9015 for a free estimate.
Why Sammamish Homes Are Different
Sammamish isn’t an urban infill market, and gate work here doesn’t follow urban patterns. The plateau’s large single-family homes, most of them built between the 1980s and 2010s in planned subdivisions like Klahanie and across the 98074 and 98075 ZIP codes, sit on generous wooded lots set well back from the road. That means most driveway gates are long custom ornamental or sliding units mounted far from the street, and the calls we get are driven by the site rather than by vandalism or traffic.
The wet, mild Puget Sound climate does the slow damage: frequent rain, high humidity held in by dense shade, and moss and algae working into gate frames, hinges and operator housings. Rust and wood rot show up early on north-facing gates that never fully dry. Then winter windstorms drop fir limbs and topple trees onto tracks and posts, and autumn slope runoff settles posts on hillside lots. On many Sammamish properties the gate is at the end of a steep, tree-lined drive, so after a storm the job is often as much about clearing boughs and re-leveling a track on a settled slope as it is about the operator. If your gate sits behind an HOA, check the architectural rules before changing its style or finish.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Sammamish Services
Two jobs bring most Sammamish homeowners to us: getting a failed gate working again, and getting a new gate built for a lot that was never easy to begin with.
Gate Repair in Sammamish
Manual gate repair on the plateau usually means the mechanical side: a sagging hinge, a post that’s settled in wet soil, a track clogged with fir needles and moss, or wood that’s rotted where water sat against the frame. Because Sammamish lots are wooded and sloped, we check the ground the gate hangs on as carefully as the gate itself, since a post that’s heaved or dropped will pull any new hardware out of alignment within a season. We diagnose the actual cause instead of replacing parts that are still sound. For the full scope, see gate repair in Sammamish.

Electric Gate Repair in Sammamish
Automated gate repair is its own specialty, and it’s most of what we do. When an operator quits mid-travel, a control board faults, a loop detector stops sensing a car, or an intercom no longer opens the gate, that’s diagnosable work with known fixes, and it’s the kind of call general handymen turn down. We work on LiftMaster and FAAC systems regularly, among others, and we trace the fault through both the mechanical gate and the electrical side in one visit. For the automation side, see electric gate repair in Sammamish.

Gate Installation in Sammamish

Gate installation on the Sammamish plateau starts with the lot, not the gate. Homes built from the 1980s through the 2010s on wooded, sloped parcels usually call for a long custom ornamental or sliding gate set well back from the road, and the wet climate means the finish and footing have to be chosen for years of rain, shade and moss rather than for a dry, sunny yard. We handle gate installation for that kind of site, whether you’re replacing an older gate that’s finally rotted out or adding one to a driveway that never had it.
Driveway Gate Installation
Signs you need it
Your driveway gate has rotted at the frame, won’t stay aligned after repeated settling, or you’re adding a gate to a long tree-lined drive for the first time.
What it costs in Sammamish
Driveway gate installation typically runs from about $1,500 to $6,500 depending on width, material and whether it’s automated, with the written estimate setting the final price.
How we do it
We measure the opening and the grade, set posts to proper footing depth on the slope, hang the gate so it clears the ground through seasonal movement, and confirm the latch and swing before we leave.
Automatic Gate Installation
Signs you need it
You want a gate that opens from the car, or your existing manual gate is too heavy or too far from the house to open by hand comfortably.
What it costs in Sammamish
Automatic gate installation typically runs from about $2,500 to $8,000 for the operator, controls and safety devices, with the written estimate setting the final price.
How we do it
We match an operator to the gate’s weight and travel, run and protect the power, set the safety edges and loop detectors, and test the full open-and-close cycle before handover.
What Gate Installation Costs in Sammamish
| Item | Typical range in Sammamish |
|---|---|
| Driveway gate installation | $1,500 – $6,500 |
| Automatic gate installation | $2,500 – $8,000 |
| Sliding gate installation | $2,000 – $7,500 |
Do I need a permit to install a gate in Sammamish?
Most gate installations that involve electrical work or a structure near the property line need a permit, so ask the City of Sammamish building department before you order. We’ll tell you what the job involves so you can check.
Can you install an automatic gate on a sloped Sammamish driveway?
Yes. Sloped, wooded lots are the norm here, and we set posts to proper footing depth and choose an operator matched to the grade and gate weight so it opens reliably through wet winters.
Brands We Service in Sammamish
We work on the gate and operator brands that show up most on Sammamish properties: LiftMaster, FAAC, Elite, and Mighty Mule among them. We don’t claim to stock parts on a truck; if a board or motor has to be ordered, turnaround depends on the part. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Sammamish, WA
| Service | Typical range in Sammamish |
|---|---|
| Manual gate repair (hinges, posts, track) | $150 – $600 |
| Gate operator repair (control board, motor) | $250 – $900 |
| Loop detector or safety edge replacement | $200 – $700 |
| Intercom or keypad integration | $250 – $800 |
| Driveway gate installation | $1,500 – $6,500 |
| Automatic gate installation | $2,500 – $8,000 |
| Sliding gate installation | $2,000 – $7,500 |
In Sammamish, price climbs with the size and weight of the gate, the finish you choose for a wet climate, and how much slope or tree work the site adds to setting the posts. We quote the price and get your agreement before any work starts, so the written estimate is what you pay.
Neighborhoods We Serve in Sammamish
We work across the plateau, from the Klahanie area to the wooded lots off the main east-side roads, and the terrain shapes each call: long driveways, dense shade, and the storm damage that follows a windy autumn night. Neighbors refer us to each other, so there’s often a technician already close by.
- Klahanie
- The 98074 plateau
- The 98075 plateau
- Pine Lake area
- Beaver Lake area
Fast dispatch from 7am to 7pm, Sunday through Friday, and we answer 24/7 if a gate fails outside that window.
Service Area – Cities Near Sammamish
We also work the surrounding Eastside communities, so a call just outside the plateau still gets a gate specialist. If you’re in or near Union Hill-Novelty Hill, WA, Redmond, WA, Issaquah, WA, or Bellevue, WA, we cover those areas too. For broader coverage, see our Bellevue Gate Repair page.
Serving Sammamish, WA – Our Local Coverage Area
We serve Sammamish and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in Sammamish
Same-day service is often possible on repair work. We answer 24/7 and send a technician with fast dispatch from 7am to 7pm, Sunday through Friday. Call (855) 683-9015 for a free estimate.
We don’t pull permits for you, but we’ll explain what the job involves so you can check with the City of Sammamish and your HOA’s architectural rules, including style, finish and setbacks, before installation.
Yes. We work throughout Sammamish, from Klahanie to the 98074 and 98075 plateau neighborhoods, on residential, HOA and commercial gates. Call (855) 683-9015 for a free estimate.
Call (855) 683-9015 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Whether your operator is a LiftMaster or a Mighty Mule, we get a gate specialist on-site to diagnose the actual problem rather than guessing at your control board.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within 30-60 min.
- 4You approve before work beginsNothing starts until you say go.
What Sammamish Customers Say
"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
- Allison Ziegler"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
- Jason Norris"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
- Paul Reed